摘要:本文主要向大家介绍了Linux运维知识之linux下(fdisk,gdisk,parted)三种分区工具比较,通过具体的内容向大家展现,希望对大家学习Linux运维知识有所帮助。
本文主要向大家介绍了Linux运维知识之linux下(fdisk,gdisk,parted)三种分区工具比较,通过具体的内容向大家展现,希望对大家学习Linux运维知识有所帮助。
1 2种分区结构简介
MBR分区
硬盘主引导记录MBR由4个部分组成
主引导程序(偏移地址0000H--0088H),它负责从活动分区中装载,并运行系统引导程序。
出错信息数据区,偏移地址0089H--00E1H为出错信息,00E2H--01BDH全为0字节。
分区表(DPT,Disk Partition Table)含4个分区项,偏移地
址01BEH--01FDH,每个分区表项长16个字节,共64字节为分区项1、分区项2、分区项3、分区项4
结束标志字,偏移地址01FE--01FF的2个字节值为结束标志55AA
GPT分区
GPT:GUID(Globals Unique Identifiers) partitiontable 支持128个分区,使用64位,支持8Z(512Byte/block )64Z ( 4096Byte/block)
使用128位UUID(Universally Unique Identifier) 表示磁盘和分区 GPT分区表自动备份在头和尾两份,并有CRC校验位
UEFI (统一扩展固件接口)硬件支持GPT,使操作系统启动
2 fdisk的使用
2.1 fdisk命令的基础
[root@centos7 mnt]$ dd if=/dev/fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xc0e6470d.
Command (m for help): m
Command action
a toggle a bootable flag # 切换可启动标志
b edit bsd disklabel # 编辑磁盘标记
c toggle the dos compatibility flag # 切换dos兼容标志
d delete a partition # 删除一个分区
g create a new empty GPT partition table # 创建一个空的GPT分区表
G create an IRIX (SGI) partition table # 创建一个IRIX分区表
l list known partition types # 列出已知的分区类型
m print this menu # 打印菜单
n add a new partition # 添加一个分区
o create a new empty DOS partition table # 创建一个空的DOS分区表
p print the partition table # 打印分区表
q quit without saving changes # 退出不保存
s create a new empty Sun disklabel # 创建一个空的sun磁盘标签
t change a partition‘s system id # 改变一个分区的类型
u change display/entry units # 改变显示的单位
v verify the partition table # 验证分区表
w write table to disk and exit # 写分区表并退出
x extra functionality (experts only) # 高级功能
Command (m for help):
2.2 fdisk实战
例子: 使用fdisk工具给/dev/sdb(100G)分区满足下面几个要求
3个主分区一个扩展分区
/dev/sdb1分区类型为Linux LVM,大小为30G
/dev/sdb2分区类型为swap,大小为20G
/dev/sdb3分区类型为Linux, 大小为10G
/dev/sdb5分区类型为linux,大小为10G
保留40G留作后用
[root@centos7 mnt]$ fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x2fd8d812.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-209715199, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-209715199, default 209715199): +30G
Partition 1 of type Linux and of size 30 GiB is set
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (2-4, default 2):
First sector (62916608-209715199, default 62916608):
Using default value 62916608
Last sector, +sectors or +size{K,M,G} (62916608-209715199, default 209715199): +20G
Partition 2 of type Linux and of size 20 GiB is set
Command (m for help): n
Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
Select (default p): p
Partition number (3,4, default 3):
First sector (104859648-209715199, default 104859648):
Using default value 104859648
Last sector, +sectors or +size{K,M,G} (104859648-209715199, default 209715199): +10G
Partition 3 of type Linux and of size 10 GiB is set
Command (m for help): n
Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
Select (default e): e
Selected partition 4
First sector (125831168-209715199, default 125831168):
Using default value 125831168
Last sector, +sectors or +size{K,M,G} (125831168-209715199, default 209715199):
Using default value 209715199
Partition 4 of type Extended and of size 40 GiB is set
Command (m for help): n
All primary partitions are in use
Adding logical partition 5
First sector (125833216-209715199, default 125833216):
Using default value 125833216
Last sector, +sectors or +size{K,M,G} (125833216-209715199, default 209715199): +10G
Partition 5 of type Linux and of size 10 GiB is set
Command (m for help): p
Disk /dev/sdb: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x2fd8d812
Device Boot Start End Blocks Id System
/dev/sdb1 2048 62916607 31457280 83 Linux
/dev/sdb2 62916608 104859647 20971520 83 Linux
/dev/sdb3 104859648 125831167 10485760 83 Linux
/dev/sdb4 125831168 209715199 41942016 5 Extended
/dev/sdb5 125833216 146804735 10485760 83 Linux
Command (m for help): t
Partition number (1-5, default 5): 1
Hex code (type L to list all codes): L
0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris
1 FAT12 27 Hidden NTFS Win 82 Linux swap / So c1 DRDOS/sec (FAT-
2 XENIX root 39 Plan 9 83 Linux c4 DRDOS/sec (FAT-
3 XENIX usr 3c PartitionMagic 84 OS/2 hidden C: c6 DRDOS/sec (FAT-
4 FAT16 <32M 40 Venix 80286 85 Linux extended c7 Syrinx
5 Extended 41 PPC PReP Boot 86 NTFS volume set da Non-FS data
6 FAT16 42 SFS 87 NTFS volume set db CP/M / CTOS / .
7 HPFS/NTFS/exFAT 4d QNX4.x 88 Linux plaintext de Dell Utility
8 AIX 4e QNX4.x 2nd part 8e Linux LVM df BootIt
9 AIX bootable 4f QNX4.x 3rd part 93 Amoeba e1 DOS access
a OS/2 Boot Manag 50 OnTrack DM 94 Amoeba BBT e3 DOS R/O
b W95 FAT32 51 OnTrack DM6 Aux 9f BSD/OS e4 SpeedStor
c W95 FAT32 (LBA) 52 CP/M a0 IBM Thinkpad hi eb BeOS fs
e W95 FAT16 (LBA) 53 OnTrack DM6 Aux a5 FreeBSD ee GPT
f W95 Ext‘d (LBA) 54 OnTrackDM6 a6 OpenBSD ef EFI (FAT-12/16/
10 OPUS 55 EZ-Drive a7 NeXTSTEP f0 Linux/PA-RISC b
11 Hidden FAT12 56 Golden Bow a8 Darwin UFS f1 SpeedStor
12 Compaq diagnost 5c Priam Edisk a9 NetBSD f4 SpeedStor
14 Hidden FAT16 <3 61 SpeedStor ab Darwin boot f2 DOS secondary
16 Hidden FAT16 63 GNU HURD or Sys af HFS / HFS+ fb VMware VMFS
17 Hidden HPFS/NTF 64 Novell Netware b7 BSDI fs fc VMware VMKCORE
18 AST SmartSleep 65 Novell Netware b8 BSDI swap fd Linux raid auto
1b Hidden W95 FAT3 70 DiskSecure Mult bb Boot Wizard hid fe LANstep
1c Hidden W95 FAT3 75 PC/IX be Solaris boot ff BBT
1e Hidden W95 FAT1 80 Old Minix
Hex code (type L to list all codes): 8e
Changed type of partition ‘Linux‘ to ‘Linux LVM‘
Command (m for help): t
Partition number (1-5, default 5): 2
Hex code (type L to list all codes): 82
Changed type of partition ‘Linux‘ to ‘Linux swap / Solaris‘
Command (m for help): p
Disk /dev/sdb: 107.4 GB, 107374182400 bytes, 209715200 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x2fd8d812
Device Boot Start End Blocks Id System
/dev/sdb1 2048 62916607 31457280 8e Linux LVM
/dev/sdb2 62916608 104859647 20971520 82 Linux swap / Solaris
/dev/sdb3 104859648 125831167 10485760 83 Linux
/dev/sdb4 125831168 209715199 41942016 5 Extended
/dev/sdb5 125833216 146804735 10485760 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
View Code
3 gdisk的使用
3.1 gdisk的命令基础
[root@centos7 mnt]$ gdisk /dev/sdb
GPT fdisk (gdisk) version 0.8.6
Partition table scan:
MBR: MBR only
BSD: not present
APM: not present
GPT: not present
***************************************************************
Found invalid GPT and valid MBR; converting MBR to GPT format.
THIS OPERATION IS POTENTIALLY DESTRUCTIVE! Exit by typing ‘q‘ if
you don‘t want to convert your MBR partitions to GPT format!
***************************************************************
Command (? for help): ?
b back up GPT data to a file # 备份一个gpt数据到文件
c change a partition‘s name # 改变分区名
d delete a partition # 删除一个分区
i show detailed information on a partition # 显示一个分区的详细信息
l list known partition types # 列出已知的分区类型
n add a new partition # 添加一个新的分区
o create a new empty GUID partition table (GPT) # 创建一个空的GUID分区表
p print the partition table # 打印分区表
q quit without saving changes # 退出不保存
r recovery and transformation options (experts only) # 专家模式
s sort partitions # 排序分区
t change a partition‘s type code # 改变分区类型
v verify disk # 验证磁盘
w write table to disk and exit # 写磁盘并退出
x extra functionality (experts only) # 额外功能(专家模式)
? print this menu # 打印菜单
Command (? for help):
3.2gdisk实战
例子: 使用gdisk工具给/dev/sdb(100G)分区满足下面几个要求
GPT分区
/dev/sdb1分区类型为Linux LVM,大小为30G
/dev/sdb2分区类型为swap,大小为20G
/dev/sdb3分区类型为Linux, 大小为10G
/dev/sdb4分区类型为linux,大小为10G
保留40G留作后用
上面我们对/dev/sdb已经分区了, 使用如下命令清空
[root@centos7 mnt]$ dd if=/dev/zero of=/dev/sdb bs=1 count=512 #清空分区的前512字节,分区表被清空,小心操作
[root@centos7 mnt]$ gdisk /dev/sdb
GPT fdisk (gdisk) version 0.8.6
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Command (? for help): p
Disk /dev/sdb: 209715200 sectors, 100.0 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 04F07BAC-C3A6-44BC-8D27-90A198C1C3B2
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 209715166
Partitions will be aligned on 2048-sector boundaries
Total free space is 209715133 sectors (100.0 GiB)
Number Start (sector) End (sector) Size Code Name
Command (? for help): n
Partition number (1-128, default 1):
First sector (34-209715166, default = 2048) or {+-}size{KMGTP}:
Last sector (2048-209715166, default = 209715166) or {+-}size{KMGTP}: +30G
Current type is ‘Linux filesystem‘
Hex code or GUID (L to show codes, Enter = 8300): L
0700 Microsoft basic data 0c01 Microsoft reserved 2700 Windows RE
4200 Windows LDM data 4201 Windows LDM metadata 7501 IBM GPFS
7f00 ChromeOS kernel 7f01 ChromeOS root 7f02 ChromeOS reserved
8200 Linux swap 8300 Linux filesystem 8301 Linux reserved
8e00 Linux LVM a500 FreeBSD disklabel a501 FreeBSD boot
a502 FreeBSD swap a503 FreeBSD UFS a504 FreeBSD ZFS
a505 FreeBSD Vinum/RAID a580 Midnight BSD data a581 Midnight BSD boot
a582 Midnight BSD swap a583 Midnight BSD UFS a584 Midnight BSD ZFS
a585 Midnight BSD Vinum a800 Apple UFS a901 NetBSD swap
a902 NetBSD FFS a903 NetBSD LFS a904 NetBSD concatenated
a905 NetBSD encrypted a906 NetBSD RAID ab00 Apple boot
af00 Apple HFS/HFS+ af01 Apple RAID af02 Apple RAID offline
af03 Apple label af04 AppleTV recovery af05 Apple Core Storage
be00 Solaris boot bf00 Solaris root bf01 Solaris /usr & Mac Z
bf02 Solaris swap bf03 Solaris backup bf04 Solaris /var
bf05 Solaris /home bf06 Solaris alternate se bf07 Solaris Reserved 1
bf08 Solaris Reserved 2 bf09 Solaris Reserved 3 bf0a Solaris Reserved 4
bf0b Solaris Reserved 5 c001 HP-UX data c002 HP-UX service
ed00 Sony system partitio ef00 EFI System ef01 MBR partition scheme
ef02 BIOS boot partition fb00 VMWare VMFS fb01 VMWare reserved
fc00 VMWare kcore crash p fd00 Linux RAID
Hex code or GUID (L to show codes, Enter = 8300): 8e00
Changed type of partition to ‘Linux LVM‘
Command (? for help): n
Partition number (2-128, default 2):
First sector (34-209715166, default = 62916608) or {+-}size{KMGTP}:
Last sector (62916608-209715166, default = 209715166) or {+-}size{KMGTP}: +20G
Current type is ‘Linux filesystem‘
Hex code or GUID (L to show codes, Enter = 8300): 8200
Changed type of partition to ‘Linux swap‘
Command (? for help): n
Partition number (3-128, default 3):
First sector (34-209715166, default = 104859648) or {+-}size{KMGTP}:
Last sector (104859648-209715166, default = 209715166) or {+-}size{KMGTP}: +10G
Current type is ‘Linux filesystem‘
Hex code or GUID (L to show codes, Enter = 8300):
Changed type of partition to ‘Linux filesystem‘
Command (? for help): n
Partition number (4-128, default 4):
First sector (34-209715166, default = 125831168) or {+-}size{KMGTP}:
Last sector (125831168-209715166, default = 209715166) or {+-}size{KMGTP}: +10G
Current type is ‘Linux filesystem‘
Hex code or GUID (L to show codes, Enter = 8300):
Changed type of partition to ‘Linux filesystem‘
Command (? for help): p
Disk /dev/sdb: 209715200 sectors, 100.0 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 04F07BAC-C3A6-44BC-8D27-90A198C1C3B2
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 209715166
Partitions will be aligned on 2048-sector boundaries
Total free space is 62914493 sectors (30.0 GiB)
Number Start (sector) End (sector) Size Code Name
1 2048 62916607 30.0 GiB 8E00 Linux LVM
2 62916608 104859647 20.0 GiB 8200 Linux swap
3 104859648 125831167 10.0 GiB 8300 Linux filesystem
4 125831168 146802687 10.0 GiB 8300 Linux filesystem
Command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/sdb.
The operation has completed successfully.
View Code
3 parted使用
3.1 parted命令基础
[root@centos7 mnt]$ parted --help
Usage: parted [OPTION]... [DEVICE [COMMAND [PARAMETERS]...]...]
Apply COMMANDs with PARAMETERS to DEVICE. If no COMMAND(s) are given, run in
interactive mode.
OPTIONs:
-h, --help displays this help message
-l, --list lists partition layout on all block devices
-m, --machine displays machine parseable output
-s, --script never prompts for user intervention
-v, --version displays the version
-a, --align=[none|cyl|min|opt] alignment for new partitions
COMMANDs:
align-check TYPE N check partition N for TYPE(min|opt)
alignment
help [COMMAND] print general help, or help on
COMMAND
mklabel,mktable LABEL-TYPE create a new disklabel (partitionM # 设置分区类型 详细使用man获取
table)
mkpart PART-TYPE [FS-TYPE] START END make a partition # 创建一个分区 start,end为M,详细信息使用man获取
name NUMBER NAME name partition NUMBER as NAME
print [devices|free|list,all|NUMBER] display the partition table, # 打印信息
available devices, free space, all found partitions, or a particular
partition
quit exit program # 退出
rescue START END rescue a lost partition near START # 救援一个丢失的分区
and END
rm NUMBER delete partition NUMBER # 删除一个分区
select DEVICE choose the device to edit # 选择一个分区去编辑
disk_set FLAG STATE change the FLAG on selected device # 改变选择分区的标记
disk_toggle [FLAG] toggle the state of FLAG on selected # 切换选择分区的标记
device
set NUMBER FLAG STATE change the FLAG on partition NUMBER # 改变指定分区号的标记
toggle [NUMBER [FLAG]] toggle the state of FLAG on partition # 切换指定分区号的标记
NUMBER
unit UNIT set the default unit to UNIT # 设置默认单位
version display the version number and # 显示版本
copyright information of GNU Parted
Report bugs to bug-parted@gnu.org
3.2 parted实战
GPT分区
/dev/sdb1分区类型为Linux LVM,大小为30G
/dev/sdb2分区类型为swap,大小为20G
/dev/sdb3分区类型为Linux, 大小为10G
/dev/sdb4分区类型为linux,大小为10G
保留40G留作后用
[root@centos7 mnt]$ parted -s /dev/sdb mklabel gpt
[root@centos7 mnt]$ parted -s /dev/sdb unit GB mkpart primary 1 30 set 1 lvm on
[root@centos7 mnt]$ parted -s /dev/sdb unit GB mkpart primary 30 50 set 2 swap on
[root@centos7 mnt]$ parted -s /dev/sdb unit GB mkpart primary 50 60
[root@centos7 mnt]$ parted -s /dev/sdb unit GB mkpart primary 60 70
[root@centos7 mnt]$ parted -s /dev/sdb print
4 三种分区的比较
fdisk只能用于MBR分区,gdisk,parted可以用于GPT分区。
fdisk大多数运维工作人员已经习惯这个交互模式。
parted命令在创建删除分区使用命令比较方便,但是功能不是太完善,没有备份还原命令。
gdisk在分区上命令和fdisk风格一样, 使用方便,学习难度低且功能强大,推荐使用。
本文由职坐标整理并发布,希望对同学们有所帮助。了解更多详情请关注系统运维Linux频道!
您输入的评论内容中包含违禁敏感词
我知道了
请输入正确的手机号码
请输入正确的验证码
您今天的短信下发次数太多了,明天再试试吧!
我们会在第一时间安排职业规划师联系您!
您也可以联系我们的职业规划师咨询:
版权所有 职坐标-一站式IT培训就业服务领导者 沪ICP备13042190号-4
上海海同信息科技有限公司 Copyright ©2015 www.zhizuobiao.com,All Rights Reserved.
沪公网安备 31011502005948号